【New】Advantages and disadvantages of several common steel stages

The common steel assembly stages on the market today are:

Cable-stayed steel stage, Steel buckle stage, Steel Layer stage, insert-type steel stage.

     The stage parts shared by the three stages are: stage board, stage connecting board, and adjusting screw. Apart from these three parts, the main difference between the three stages is the difference in the way the rails and columns or the braces and columns are connected.

      The principle of the cable-stayed steel stage comes from the mobile scaffolding, and the support pin is locked between the column and the diagonal support;

      The buckle stage and the stage structure of the Reyal frame are slightly similar, and are connected by a crossbar and a column, the difference being that the structure of the joint between the crossbar and the column is different.

• According to the speed of construction: Layer  type > buckle type > diagonal type.

• According to the degree of stability: Layer type  > buckle type > diagonal pull type.

• According to the safety index comparison: Layer  type > buckle type > diagonal pull type.

It should be noted that all three stages can meet the needs of daily performance activities. The above three comparisons are limited to the relative ones, and it does not mean that the cable-stayed stage is not suitable for performance activities.